Caulk & Adhesive

Crawl Space Encapsulation Caulk

White crawl space encapsulation caulk is used to seal the crawl space wall liner to the foundation wall. This caulk works best if; the crawl space is very wet, the Foundation Seal Tape™ won't stick properly, foundation is made of brick or for inside corners. This caulk requires moisture to cure properly so I will not work well if the foundation walls are dry. 

Instructions- 

1. Apply a pencil size bead to the foundation wall in a straight line, only as far as you can work in a few minutes
2. Press on corner of your wall liner into the caulk
3. Drill a 1/4" hole through the wall liner and into the foundation wall about 1.5" deep
4. Press a Foundation Pins™ through the hole in the wall liner and into the foundation hole until the head is flush
5. While holding the wall liner with one hand press another 2-3 feet of wall liner into the caulk and hold it
6. Drill another 1/4" hole through the wall liner and foundation wall about 18" down from the first one
7. Insert another Foundation Pin™
8. Continue applying the crawl space encapsulation caulk along the wall 2-3 feet at a time while installing Foundation Pins™ through the wall liner every 16-18" until the entire wall has barrier
9. NOTE* install 2 Foundation Pins™ in each inside and outside corner(one on each wall)
10. If properly taped, piers do not need caulk or Foundation Pins™

Mortar Caulk 

This caulk is used to seal any small cracks in the block foundation or mortar joints to to keep out hot, cold or moist air & insects. Gray in color to match cement block and cement mortar joints.